max. depth 100m
For shallow water applications industrial sensors are best choice. The pH electrode incorporates a double pin-hole diaphragm and a gel polymer solid electrolyte, which is AgCl free and thus resistant to sulfides. The electrode allows reliable measurements in e.g. suspensions or sulfide-bearing water. The sensor has a standard S7/S8 head and is screwed into a flange with a fitting socket. A coaxial contact makes the electrical connection to the flange.
The pH sensor is supplied with a storage solution in a wetting cap. The cap must always be placed beneath the sensor and contain sufficient storage solution to store the sensor when not in use. The storage solution should be a 3 M KCl solution that prevents the reference electrode from drying out.
The sensor needs replacement after a lifespan of approximately 12 months (depending on the measuring environment).
Technical data:
- Pressure resistance: 100 dbar
- Temperature range: 0…60 °C
- Measuring range: 2…12 pH
- Electrical Connector: S8
- Process Connection: PG13,5
- Dimensions: 12 mm Ø, 120 mm long
- Material: Glass, if armored PVC-U
- Used for: CTD48, CTD48c, CTD48M, CTD48Mc, CTD75M, CTD90, CTD90M, CTD115M